Retired Products
Home Up EC Motor Controls HVAC Controls Product Datasheets New Products U.S. Distributor Information Tech Support Feedback Links Applications

 

 

Click on photo to download the Retired ACU+ Datasheet...

 

EVOTM/ECM-ACU+ Automation Control Unit

(Replaced by the EVO/ECM-ACU+S1.1 Unit on the EC Products Page)

 

Allows industry standard 0-10Vdc controllers to adjust and monitor the G.E. ECMTM Motor.

Allows remote adjustment of output from 0 to 100% of programmed control range.

Outputs 0-2000 RPM as 0-10Vdc Signal

Lamp indicators reference flow index.

The "P" version provides ON/OFF control.

 

User Control Unit (UCU) by Evolution Controls Photo

Click on photo to view or download Retired UCU Datasheet...

 

EVOTM/ECM-UCU (End) User Control Unit

(Replaced by the EVO/ECM-ACU+S1.1 Unit on the EC Products Page)

 

Precise adjustment.
Power lamp gets brighter with increased output.
Utilizes a single turn pot to set 0-100% motor output.
1/4" Easy-out shaft can be used with a variety of standard knobs.
No instruments required.
On/off option turns motor off with pot.

 

Manual Control Unit (MCU) by Evolution Controls Photo

Click on photo to download the Retired MCU Datasheet...

 

EVOTM/ECM-MCU Manual Control Unit

(Replaced by the EVO/ECM-ACU+S1.1 Unit on the EC Products Page)

 

Precise adjustment.
Lamp indicates percent output setting.
Optional status lamp can indicate over/underspeed or dirty filter.
No instruments required.

 

Digital Control Unit by Evolution Controls Photo

Click on photo to download the Retired DCU Datasheet...

 

EVOTM/ECM-DCU Digital Control Unit

(Replaced by the EVO/ECM-VCU Unit on the EC Products Page)

 

Fast, precise adjustment.
Can be accurately set in the field
Optional status lamp to indicate settings.
No instruments required.

 

Click on photo to download the Retired Air FiddlerTM Datasheet...

 

EVOTM/ECM-Air FiddlerTM

The Air Fiddler allows adjustment, time scheduling and monitoring of up to 124 EC powered FFU's from a single location.

 

Airflow.
RPM Low Limit.
RPM High Limit.
Alarm Status
Alarm Horn
External Alarm
Time Scheduling
External Override

 

Click on photo to download the Retired Air FiddlerTM Datasheet...

 

EVOTM/IF-4DI1AO Control Unit

4 Digital Inputs, 1 0-10Vdc Output Universal Control Unit

(Replaced by the EVO/10Y-4Spd Unit on the HVAC Controls Page)

 

Monitors up to four 24Vac inputs and provides a 0-10Vdc output signal.
Four onboard pots allow factory or field adjustment.
The input, onboard and output functions are connected to an onboard microcontroller.
A program in loaded to the microcontroller to meet the specific needs of the application.
A common application allows 24Vac thermostat signals to position a proportional valve or damper actuator.

 

 

 

NOTE: Retired Products may still be ordered, but will:  depend on component availability; require 10-14 weeks lead time; and have a minimum order of 100 units.

 

 

Evolution Controls Inc.    San Diego, CA, USA     Ph. 858-748-7359    Fax 858-679-3365
Comments: Sales@gotoevo.com
Last modified: April 02, 2017